Industrial Filter Systems: A Guide for Investments

By Russ Brandon - 2016-12-04

As you seek out the right industrial filtration system for your needs, you will come to one conclusion: there are many options available in the open market. When you're a novice in this field, you begin to wonder: what industrial filtration system do you need or buy in the end?

The ultimate goals for the best industrial filtration system are effectiveness, ease of use and heavy-duty. If you incorporate this into your buying decision and installation process then it won't be hard. If you need to do more research on industrial filters, visit the Fil-Trek website for additional information.

Indeed, there is just so much to know when it comes to studying, browsing and purchasing the right industrial filter system. When you equip yourself with the knowledge then everything becomes just a little bit simpler. And that is what we need in this complex market.

Here are five things you need to know on the industrial filter system you choose:

Doesn't EHC Filtration Flushing Contaminate?

Electrohydraulic (EHC) filtration is something that experts say can cover a wide variety of categories. However, one of the reasons why some are hesitant when it comes to using this function is because contamination is common issue in EHC filtration systems. Oftentimes, you will see outages and damage, and contamination is inevitable. Therefore, be ready for downtime.

Lube Oil Fish Helps Big Time

If you maintain a piping system that comes into contact with a large number of heavy particles and scale then a lube oil fish can be utilized to rectify the situation. When you want to eradicate all flow obstacles then you need to flush the system with a high velocity flush, using an external pump and filter. This should be performed four or five times, which removes the build up.

Preventing Water is Difficult

Most industrial experts will contend that preventing water or moisture from an industrial filtration system can be rather difficult. Indeed, small amounts of water can be eviscerated by utilizing water-absorbing filters and breathers. However, in order to remedy the problem of large amounts of water, you will need to incorporate a vacuum dehydrator and centrifuge.

Removing Air is Achievable

Did you know that aeration can be an immense problem if it is tackled the right away and almost immediately? The reason why is because it can cause damage to your pump and slow down the process of the hydraulic system. Want to remove the air? It's simple: add a 100-mesh screen into the reservoir system and then gather the air together and enable bubbles to rise to the surface.

Maintaining the Condition of the Oil

When you want to avoid having to come to grips with flush turbines, you need to always maintain the good condition of the oil. Yes, it's true: it can be hard to accomplish because of the various kinds of oil and lubricant offered by suppliers and other brands.

What you can do is to simply check the system's interior by taking advantage of an endoscope. You can learn more about industrial endoscopes at SKF. Moreover, in order to get rid of the contaminants (think sludge and rust), you have to clean the entire system and then immediately start to flush. Afterwards, you need to replace the oil.

Although some say you can do this on your own, it is always best to hire a professional.

The biggest obstacles to running the industrial filtration system as smooth as possible consist of a lot of things: the fluid source, the heat exchanger materials, the downtime of the filter maintenance and the source of the contaminants discovered in the fluids.

This is why you have to ensure that the initial investment in industrial filtration system is a sound one, and then understand the long-term operating costs of the machine. You can't just bargain hunt and find the cheapest one. You have to acquire a system that can easily tackle all of the aforementioned and guarantee a minimal amount of downtime.

Back to Blog